Products
Cabinets, Vaults and Pedestals
Cabinets, Vaults and Pedestals
Digicomm offers a wide variety of cabinets and pedestals in various sizes by the leading manufacturers in the industry.
- Lynn Active Outdoor Cabinet (24 RMU)
- Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 864)
- Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 576)
- Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 288)
- Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 144)
- MDU Enclosures
- Pedestals
- Vaults
Lynn Active Outdoor Cabinet (24 RMU)
Made right here in the U.S. and BABAA compliant. NEMA 3R rated outdoor cabinet designed for the harsh conditions of Outside Plant. Supports the cable management, power, security, and airflow needs of industrial, broadband and edge applications. Available in standard 24 RMU and custom sizes including double bay. Available fully loaded with distribution panels customized and preloaded with outdoor pigtails.
Cabinet/Metal Components:
- NEMA 3R rated to provide protection against ingress of dust, dirt, water dripping and light splashing, rain and snow
- 48″H x 30″W x 36″D cabinet, 24 RMU (custom sizes available including double bay)
- Two pair of depth adjustable, #12-24 tapped, mounting rails for 19 or 23″ EIA; includes RMU markings
- Rails with integrated cable management including: square hole pattern for 1/4 turn “D” rings; zero-U mounting pattern for cable management fingers, spools, etc.; and “T” slots for use with optional cinch straps
- Front and rear door with 90-degree wind stop and 3-point latch swing handle; includes hasp for optional padlock
- Front door configured with slim design, 6000 BTU AC unit; includes ethernet port and 500W heater; insulation installed throughout cabinet for improved temperature control; heat exchanger available
- Nominal conduit access locations on right side of cabinet (conduit locations customizable)
- Power and grounding components installed including external load center and power inlet box, internal receptacles boxes, and grounding bus bar (all customizable)
- Lifting eyes and solar shield included and installed
- 6, 12, and 24 in. stackable plinths available; battery tray available in plinth; Lithium Ion battery available
- Aluminum construction with UV rated, textured powder coat
Fiber Components:
- Splitter holders available
- Fiber cable management
- Distribution panels fully customizable and preloaded with outdoor pigtails
Full Specs
Technical Drawing
Drill Template
LYNN Outdoor Cabinet Guide
Construction
Rack Capacity: 24 RMU (single bay), 48 RMU (double bay)
Dimensions: 48″H x 30″W x 36″D, Custom sizes available
Mounting Rails: 19/23″ EIA
AC: 6,000 BTU (customizable) with Ethernet port
Power: 48V DC power (customizable)
Heater: 500W (customizable)
Rectifier: available option
Doors: Front and rear door with 3-pt latch swing handle with hasp
Lifting Eyes: 4
Material: .125” Aluminum construction
Color: painted gray (RAL 7035)
Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 864)
Designed for FDH deployment with 6 2U BladeHD™ enclosures for up to 864 SC/APC outputs with 1U BladeHD™ for SC/APC inputs, painted stainless steel.
- Installs on Pole or Pad
- Up to 864 SC Ports
- Available with Ruggedized Outdoor Splitters
- Painted Stainless Steel
- Vented Top
Full Specs
BladeHD Outdoor Cabinet Datasheet
BladeHD Datasheet
BladeHD Installation Manual
Construction:
No. of Rack Spaces: 2U
Mounting Pattern Matches:
CommScope/TE FDH 3000 FD3-AE Small Cabinet (72-288 fibers)
CommScope FD3-AG Medium Cabinet (72-432 Fibers)
Cabinet Material: Stainless steel
BladeHD Chassis Material: 16 gauge steel with black electrostatic polyester powder coat paint
Fiber Count: Max. 864 SC. Ruggedized Outdoor PLC splitters preloaded.
Operating Temperature: -5°C to 60°C
Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 576)
Designed for FDH deployment with 4U BladeHD™ enclosures for up to 576 SC/APC outputs with 1U BladeHD™ for SC/APC inputs, painted stainless steel.
Includes: 12-fiber 1 m pigtails for inputs, 1U BLADEHD (TM) enclosures for SC/APC outputs, preinstalled 100 ft outdoor pigtails.
- Installs on Pole or Pad
- Up to 576 SC Ports
- Available with Ruggedized Outdoor Splitters
- Painted Stainless Steel
- Vented Top
Full Specs
BladeHD Outdoor Cabinet Datasheet
BladeHD Datasheet
BladeHD Installation Manual
BladeHD FDH Technical Drawing
BladeHD FDH Wood Pole Mount Technical Drawing
Construction:
No. of Rack Spaces: 11U
Mounting Pattern Matches:
CommScope/TE FDH 3000 FD3-AE Small Cabinet (72-288 fibers)
CommScope FD3-AG Medium Cabinet (72-432 Fibers)
Cabinet Material: Stainless steel
BladeHD Chassis Material: 16 gauge steel with black electrostatic polyester powder coat paint
Fiber Count: Max. 572 SC. Ruggedized Outdoor PLC splitters preloaded.
Operating Temperature: -5°C to 60°C
Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 288)
Designed for FDH deployment with 4U BladeHD™ enclosures for up to 288 SC/APC outputs with 1U BladeHD™ for SC/APC inputs, painted stainless steel.
Includes: 12-fiber 1 m pigtail for inputs, 1U BLADEHD (TM) enclosures for SC/APC outputs, preinstalled 100 ft outdoor pigtails.
- Installs on Pole or Pad
- Up to 288 SC Ports
- Available with Ruggedized Outdoor Splitters
- Painted Stainless Steel
- Vented Top
Full Specs
BladeHD Outdoor Cabinet Datasheet
BladeHD Datasheet
BladeHD Installation Manual
BladeHD FDH Technical Drawing
BladeHD FDH Wood Pole Mount Technical Drawing
Construction:
No. of Rack Spaces: 8U
Mounting Pattern Matches:
CommScope/TE FDH 3000 FD3-AE Small Cabinet (72-288 fibers)
CommScope FD3-AG Medium Cabinet (72-432 Fibers)
Cabinet Material: Stainless steel
BladeHD Chassis Material: 16 gauge steel with black electrostatic polyester powder coat paint
Fiber Count: Max. 288 SC. Ruggedized Outdoor PLC splitters preloaded.
Operating Temperature: -5°C to 60°C
Lynn BladeHD™ Outdoor Splitter Cabinet (FDH – 144)
Designed for FDH deployment with 4U BladeHD™ enclosures for up to 144 SC/APC outputs with 1U BladeHD™ for SC/APC inputs, painted stainless steel.
Includes: 12-fiber 1 m pigtail for inputs, 1U BLADEHD (TM) enclosures for SC/APC outputs, preinstalled 100 ft outdoor pigtails.
- Installs on Pole or Pad
- Up to 144 SC Ports
- Available with Ruggedized Outdoor Splitters
- Painted Stainless Steel
- Vented Top
Full Specs
BladeHD Datasheet
BladeHD Installation Manual
BladeHD FDH Technical Drawing
BladeHD FDH Wood Pole Mount Technical Drawing
Construction:
No. of Rack Spaces: 4U
Mounting Pattern Matches:
CommScope/TE FDH 3000 FD3-AE Small Cabinet (72-288 fibers)
CommScope FD3-AG Medium Cabinet (72-432 Fibers)
Cabinet Material: Stainless steel
BladeHD Chassis Material: 16 gauge steel with black electrostatic polyester powder coat paint
Fiber Count: Max. 144 SC. Ruggedized Outdoor PLC splitters preloaded.
Operating Temperature: -5°C to 60°C
MDU Enclosures
MDUs (Multiple Dwelling Units), are also known as Apartment Boxes, Network Enclosures and Media Enclosures. Used to house network equipment (both passive/active) in Apartment Complexes, Hotels, Motels, and Office Buildings.
Digicomm stocks a variety for many different requirements.
The following should be considered for your application/requirement.
- Size: H”xW”xD”
- Indoor/Outdoor
- Color
- Material: Metal, Plastic
- Internal Bracketry
- Lock Configuration or Hasp
Pedestals
Pedestals protect network equipment from vandalism, weather elements and extreme temperatures, while providing field personnel easy access for repair, upgrade or routine maintenance.
Digicomm stocks pedestals from many manufacturers in multiple sizes, styles and colors to fit your specific requirements.
The following should be considered for your application/requirement.
- Size: W”xL”xH”
- Color
- Material: Metal, Plastic
- Internal Bracketry
- Lock Configuration or Hasp
Vaults
Vaults are designed to protect, while providing an underground access area for network equipment. They can be constructed of Fiberglass, HDPE, or polymer concrete and can have several “Tier Ratings” dependent upon traffic requirements. Vaults are manufactured in a multitude of sizes & styles, and the smaller versions are called handholes.
Digicomm has a large variety of vaults in STOCK, ready for immediate shipping.
Information needed for quotation:
- Size: H”xW”xD”
- Preferred Material: Fiberglass, HDPE, Polymer Concrete
- Tier rating: Light/Medium Duty, 5,8,15,22
Contact Us
Have questions? Need a quote or want to speak to a sales specialist?
Stay in Touch
Ⓒ2024 Digicomm International. All rights reserved. | Website powered by NEWMEDIA.COM