Products
Power Systems
MikroTik Power Systems
- 24HPOW
- 48POW
- 48V2A96W
- MTP250-26V94-OD
- MTP250-53V47-OD
- UP1302C-12
- PW48V-12V85W
- RBPOE
- RBGPOE
- RBGPOE-CON-HP
- GESP+POE-IN
- GESP
24HPOW
High power 24V 2.5A power supply + power plug. Recommended for long cable runs with several high power wireless cards.
Details | |
---|---|
Product code | 24HPOW |
Input voltage | 100/240V 1.6A |
Tested ambient temperature | -30℃ to +50℃ |
48POW
48V 1.46A 70W Power Adapter + Power plug
Details | |
---|---|
Product code | 48POW |
Current | 1.46A |
Input voltage | 110/220V |
Output Voltage | 48V |
48V2A96W
48 V 2 A 96 W power supply, to be used with our products that support 48 V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48 V 1.46 A 70 W), allowing more power per port. Comes with the power plug of your choice (EU, US or UK version).
Details | |
---|---|
Product code | 48V2A96W |
MTP250-26V94-OD
Outdoor 26V 250W AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice. Pole/wall mount compatible!
Details | |
---|---|
Product code | MTP250-26V94-OD |
Box size (LWH) | 240 x 46.5 x 69 |
Certification | CE, EAC, ROHS |
IP | IP67 |
Tested ambient temperature | -40°C to 70°C |
MTP250-53V47-OD
Outdoor 53V 250W AC/DC power supply units for the MikroTik netPower product line. Built for situations when your outdoor switches need that extra juice. Pole/wall mount compatible!
MTP250-53V47-OD can output 53V 250W, while the MTP250-26V94-OD (see related products) works with a 26V 250W output. Both power supplies come in a sturdy IP67 enclosure with extra protection from dust and moisture.
Details | |
---|---|
Product code | MTP250-53V47-OD |
Box size (LWH) | 240 x 46.5 x 69 |
Certification | CE, EAC, ROHS |
IP | IP67 |
Tested ambient temperature | -40°C to 70°C |
UP1302C-12
12V 10.8A internal power supply for CRS326-24S+2Q+RM and CCR1036 series (only for new r2 revisions with dual power supplies), as well as new CCR2116-12G-4S+
Details | |
---|---|
Product code | UP1302C-12 |
Box size (LWH) | 55x106x34 |
PW48V-12V85W
±48 V DC telecom Open Frame Power supply with 12 V 7 A output, for use with Cloud Core Routers since revision "r2" or the new CCR2004-1G-12S+2XS and CRS326-24S+2Q+RM. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for ±48 V installations.
Although made specifically for -48V telecom power, the supported input range is from 36V to 57V. Note: To use, positive terminal must be 36 to 57V higher potential than negative terminal (eg. if negative terminal is -48 V, the positive must be -12 to +9 V).
Details | |
---|---|
Product code | PW48V-12V85W |
IP | IP00 |
Input voltage | ±48V, 3A |
Output Voltage | 12V, 7A |
Tested ambient temperature | -20...+60C |
RBPOE
PoE injector, for 10/100Mbps products
Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations.
For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
Details | |
---|---|
Product code | RBPOE |
Input voltage | 10 - 28 V |
Output Voltage | Same as input |
RBGPOE
![](https://i.mt.lv/cdn/rb_images/1967_hi_res.png)
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 18-57V; PIN 4,5 18-57V; PIN 7,8 RETURN. The GPOE has shielded connectors.
Details | |
---|---|
Product code | RBGPOE |
Current | 2A |
Input voltage | 18-57 V |
Output Voltage | Same as input |
Tested ambient temperature | -40°C to 70°C |
RBGPOE-CON-HP
![](https://i.mt.lv/cdn/rb_images/1181_hi_res.png)
This device lets you use any 48V PoE source (including Passive PoE, Telecom PoE, 802.3af and 802.3at) to power RouterBOARD devices. Simply plug any 48V PoE powered ethernet cable into one port, and any 8-30V capable RouterBOARD device into the other. This device is capable to provide high power output - up to 24W (up to 1A at 24V). You can power it with virtually any 42-57V PoE solutions available on market today (Passive, Telecom, 802.3af and 802.3at PoE plus supported). The device is a rugged metallic design, with high quality components and integrated heatsink design. The case also has mounting holes so you can attach it to a wall. Ethernet shield pins are inside the Ethernet connectors, so that shielded ethernet can be used, to ground either at the converter itself, or at the devices at both ends. Supports 10/100/1000Mbps Ethernet.
Note: In case if 803.3af compliant PSE is used, total output power should not exceed 12.95w (limited by the 803.3af standard).
Details | |
---|---|
Product code | RBGPOE-CON-HP |
10/100/1000 Ethernet ports | 2 |
Certification | CE, ROHS |
Input voltage | 42-57V (Passive, Telecom, 802.3af and 802.3at PoE plus supported) |
Max out per port output (input 18-30 V) | 1 A |
Max total out (A) | 1 A |
Output Voltage | 24 V 1 A |
PoE in | 802.3af/at |
PoE out | Passive PoE |
Tested ambient temperature | -35C to +70C |
GESP+POE-IN
GESP+PoE is a passive PoE injector with surge protection. Combine it with the GESP devices for maximum security and peace of mind.
You can’t buy safety, but you can buy MikroTik devices to keep your setup safe. Take a look at the GESP product line. It consists of a new revision of the classic MikroTik GESP surge protector and a brand new device – the GESP+POE-IN, a passive PoE injector with surge protection. Together these two devices offer maximum security and peace of mind.
Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protector up there. It comes sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm. Now add the GESP+POE-IN injector below the mast - to protect the switches and to power the antennas.
Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables. These small devices can make all the difference when it comes to lightning strikes or static build-up.
Details | |
---|---|
Product code | GESP+POE-IN |
GESP
![](https://i.mt.lv/cdn/rb_images/2031_hi_res.png)
GESP is Gigabit Ethernet Surge Protector that can be used to protect the network from lightning or surge damages.
Here’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.
Don’t forget about the grounding wire! Secure it to the rackmount, mast, or any other structure that is connected to the ground. For maximum protection, you should use a surge protector on both ends of long cables.
Details | |
---|---|
Product code | GESP |
View Other MikroTik Products
Ⓒ2024 Digicomm International. All rights reserved. | Website powered by NEWMEDIA.COM